DustScan DS500X Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida DustScan DS500X. DustScan DS500X 6 páginas. Dust monitoring service

Imprimir página
DustScan
Dust Consultancy and Dust Monitoring Services
Introducing the DustScan
DS500X
The
is a low-cost flexible method
for ambient, outdoor dust and air quality
monitoring.
It
combines
DustScan directional dust gauge and a
battery-powered,
sampler in one unit for simultaneous sampling
of dust flux and gravimetric particulates.
When combined with the DustDisc sampler
(DS500X-D) simultaneous monitoring of
directional dust flux, dust deposition and PM
can be achieved in one unit.
The directional gauge is a passive system
that requires no power supply and along with
the PM
inlet is installed semi-permanently
10
on site. Sampling heads are systematically
changed every 7 or 14 days. The filter
reference
PM
sampler is programmed to
10
run for a full week and can be powered either
by battery (12V) or the mains (240V). Sampler
units and battery cases are removed and
replaced on a weekly basis.
DS500X
The
can be located in remote sites
and is therefore ideal for baseline PM
monitoring,
compliance
routine fenceline boundary monitoring.
DS500X
The
has a certificated PM
selective inlet jet impactor system with a PM
version currently in development.
24hr average µg/m
calculated from the 7 day sample. A variety of
filter papers are utilised to permit further
sample analysis as required.
the
standard
filter
reference
monitoring
10
3
PM
concentrations are
10
Griffin House, Market Street,
Charlbury, Oxford, OX7 3PJ, UK
Tel: +44 (0)1608 810110
Fax: +44 (0)1608 810227
PM
10
10
The gauge utilizes a new and
10
improved
and
includes:
•
SD card data storage
size-
•
Air temperature, humidity and
2.5
pressure sensors
•
25mm filter cassette for improved
PM detection threshold
•
Fully enclosed sampler housing
DS500X
sampler
unit
www.DustScan.co.uk
which