Datalogic Jet Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Estación de acoplamiento Datalogic Jet. Datalogic Jet 2 páginas. Vehicle cradle
También para Datalogic Jet: Manual de inicio rápido (2 páginas), Manual del usuario (2 páginas)

Imprimir página
Datalogic Jet Manual del usuario
By inserting the Datalogic Jet™ PDA into the cradle, data can be transmitted to the host and its battery
begins charging if the power supply is connected. In addition, an extra battery can be charged by inserting
it into the slot at the back of the Datalogic Jet™ Single Cradle Desk as shown in the following figure.
Extra Battery
Charge Slot
Figure 2 – Datalogic Jet™ Single Cradle Desk Charging
The LEDs positioned on the front part of the Datalogic Jet™ Single Cradle Desk (see figure below)
indicate the cradle and extra battery charger status:
Extra Battery
Charger LED
Figure 3 - LED Indicators
LED
STATUS
Charger
Red Constant:
Green Constant:
Orange Blinking:
Power
Green:
Data Transmission and
PDA Battery Charging
Power LED
charging
charge completed
error
it is constant when the cradle is powered
The Datalogic Jet™ Single Cradle Desk can be connected to a host by means of an RS232 interface, or a
USB interface.
RS232 CONNECTION
A single Datalogic Jet™ Single Cradle Desk can be connected to the host by means of any standard null
modem cable. The 9-pin female D-Sub connector must be connected to the RS232 port of the cradle.
Once the host has been turned on, insert the Datalogic Jet™ PDA into the cradle.
A
Figure 4 - RS232 Connection
A)
Host Computer
C)
Datalogic Jet™ Single Cradle Desk
*
Recommended power supply: 94ACC4595 FPS18 W/O POWER CORD.
USB CONNECTION
Datalogic Jet™ Single Cradle Desk can be connected to the host by means of a CAB-381 cable (USB
straight cord).
Once the host has been turned on, insert the Datalogic Jet™ PDA into the cradle.
A
Figure 5 - USB Connection
A)
Host Computer
C)
Datalogic Jet™ Single Cradle Desk
*
Recommended power supply: 94ACC4595 FPS18 W/O POWER CORD.
B
C
D*
B)
Standard Null Modem Cable
D)
*Power Supply (only necessary for battery charging)
B
C
D*
B)
94A051550 CAB-381 USB Type A-B Straight Cable
D)
*Power Supply (only necessary for battery charging)