Dutch BONE CABINET CLASS Instrucciones de montaje - Página 2

Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior Dutch BONE CABINET CLASS. Dutch BONE CABINET CLASS 2 páginas.

FURNITURE TIPPING RESTRAINT FOR: CABINET CLASS

Young children may be injured by tipping furniture and the use

of a tipping restraint is highly recommended.

When properly installed, this restraint could provide protection

against the unexpected tipping of furniture due to small tremors,

bumps or climbing. We recommend mounting this restraint to a

wall stud.

WARNING: This product is only a deterrent. It is not a

substitute for proper adult supervision.

Installation Instruction:

1. Attach one of the mounting brackets securely near the top back edge of the furniture piece by inserting the

screw.Refer to picture A.

2. Determine the final position of the furniture piece. Mark location on the wall approximately 2" below the

bracket mounted to the back of the furniture.

3. Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall and insert plastic

anchor. Gently tap anchor until the flange of the anchor is flush with the wall.

4. Attach the second bracket by inserting and securing the screw to the wall. Refer to picture B.

5. Align the two brackets.

6. Thread the strap through both brackets and tighten until snug.

7. Check to make sure that the brackets are firmly installed the strap is secure.

THE WALL

TIPPING KIT CHECK LIST

CODE

COMPONENT

PLASTIC STRAP

SCREW

NYLON WALL PLUG

METAL BRACKET

BACK SIDE

QTY