Datamate M83 Series Manual - Página 10

Navegue en línea o descargue pdf Manual para Cables y conectores Datamate M83 Series. Datamate M83 Series 16 páginas. Rectangular connectors

APPENDIX 2 – COAX CONTACT DETAILS

A2.1. COAX INTERFACE DIMENSIONS

A2.2. COAX ASSEMBLY INSTRUCTIONS – M80-305/306/307, M80-315/316/317

1) Strip cable to dimensions shown against relevant part (see appropriate engineering drawings).

Inner Insulator

Inner Conductor

2) Identify pieces of coax connector to be assembled.

Body

3) Slide sleeve onto cable past stripped area.

4) Crimp contact to end of cable inner conductor.

Contact

5) Insert cable and contact into coax body from back end – make sure that the braid goes outside and

over the end section.

6) Slide sleeve back over the end of the coax body and the braid. Crimp into place on the cable

insulation, using a hexagonal crimping tool.

COMPONENT SPECIFICATION

Male

Crimp here

Body

- 10 -

Female

Outer Insulator

Braid

Contact

Sleeve

Braid

Crimp here

C00525

Sleeve