Datamate M83 Series Manual - Página 15

Navegue en línea o descargue pdf Manual para Cables y conectores Datamate M83 Series. Datamate M83 Series 16 páginas. Rectangular connectors

APPENDIX 6 – INSTRUCTIONS FOR THE USE OF

1. Before engaging, the slot on the jackscrew should be at right angles to the length of the

connector.

2. Push the connectors together. Once the connectors are mated, use a screwdriver to push

down onto each 101Lok Jackscrew until the spring is compressed. Turn the Jackscrew 101

degreess, and release. The Jackscrew should remain partially compressed.

3. To disengage, use a screwdriver to push down on each 101Lok Jackscrew until the spring is

compressed. Turn the Jackscrew anti-clockwise 101 degrees, and release. The Jackscrew will

spring back to its uncompressed position.

COMPONENT SPECIFICATION

- 15 -

JACKSCREWS

C00525