Datamax E-Class Mark III Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Etiquetadora Datamax E-Class Mark III. Datamax E-Class Mark III 7 páginas. Paper menu

Special Functions

Items 1 (Prn Menu), 6 (Quick Cal), 10 (Entr Hex Dump) and 11 (Prn Full Config) are special functions.

They work as follows:

1. Two seconds after the item is selected, the right LED will illuminate red.

2. To invoke the function, press the button once. The function will execute immediately, without a 10

second waiting period.

To cancel the function, do not press the button, and wait 10 seconds. The left LED will blink green slowly

to indicate that the top of the Paper Menu has been accessed.

Quick Cal

When Item 6, Quick Cal, is invoked, the paper will start moving immediately. When the function has

completed, the LEDs will display the result as follows:

Passed:

Left LED blinks green briefly

Warning:

Left LED blinks orange briefly

Fail:

Left LED blinks red briefly

Hex Dump

Invoking this function exits the paper menu. To terminate the Hex Dump, cycle power to the

printer.

Menu Exit

To exit the menu, press and hold the button for five seconds, the LED will stop blinking. Then release the

button, the printer will then be ready for normal operation.

When the printer first enters the menu, the printer setting for the Index Mode is set to Continuous Mode

and the Media type is set to Direct Thermal. The two original setting are preserved and restored upon

proper exit from the menu system. If the user exits the menu via a power cycle the original settings will

not be restored and the user will have to manually reset these.