Datamax MICROFLASH 4T Manual - Página 2

Navegue en línea o descargue pdf Manual para Etiquetadora Datamax MICROFLASH 4T. Datamax MICROFLASH 4T 2 páginas. External charger swivel lock
También para Datamax MICROFLASH 4T: Manual de inicio rápido (2 páginas)

Imprimir página

Attaching the Power Supply

Use the following procedure to attach the power

supply to the

. If the power supply is

depot charger

already attached to the

depot charger

Attaching the Printer(s).

1. Insert the AC Adapter into the

Adapter cradle (Figure 6).

2. Plug the AC Adapter's connector into the

's power supply cable socket (Figure 7).

charger

3. Plug the Grounded AC Adapter's connector into

the AC Adapter's socket (located on the AC

Adapter cradle). Verify the 3-prongs of the

Grounded AC Adapter's connector match the AC

Adapter's socket (Figure 7).

AC Adapter's connector

Depot charger's power supply

cable socket

Depot charger's AC Adapter

cradle

AC Adapter

Figure 6

AC Adapter 3-prong socket

Grounded AC Adapter

Figure 7

4. Plug the Grounded AC Adapter cord to an outlet.

5. Plug in the external charger at each location

(Figure 8).

Figure 8

Note: Make sure you regularly clean the

charging contact points on your printer's case

to ensure your printer's batteries are properly

charged and avoid damage to printer or

charger. To clean the charging contact points,

unplug the charger from the wall and clean

using alcohol and a clean rag.

Attaching the Printer(s)

1. Place the printer's swivel mount block over the

unlocked swivel lock bracket (Figure 9).

, proceed to

2. Facing the printer, move the swivel lock lever from

left to right until it "clicks" into the locked position

's AC

depot charger

(Figure 10).

depot

Figure 9

Warranty

The Company warrants that Datamax-O'Neil, products are free

from defects in manufacturing materials and workmanship for one (1)

year from date of original purchase to Buyer/Distributor (OEMs 90 days from

the date of purchase). Batteries, cables, power supplies, and other

accessories will be warranted for ninety (90) days. Datamax-O'Neil

makes no other warranties, expressed or implied, including

implied warranties of merchantability and fitness of purpose.

If you try to repair, disassemble, or change the product in any way, or use

parts not provided by Datamax-O'Neil without prior, written authorization, all

warranties are void. For complete warranty and service information, see the

Warranty Card included in your printer's original packaging.

No Liability for Negligent Use

In no event shall Datamax-O'Neil be held liable for any damages

whatsoever (including, without limitations, damages for loss of

profits, business interruption, loss of information, or other pecuniary loss)

arising out of negligence in use and care of the product.

Figure10

110164-002

MICROFLASH

External Charger Swivel Lock