ADE KE 1420 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE KE 1420. ADE KE 1420 14 páginas. Modelo felia
Imprimir páginaThank you for deciding to purchase this high-quality product from the ADE Company.
You have purchased a set of scales of the highest technical standard and proven quality.
Please read through this operating manual carefully before starting-up the scales for the
first time, and keep it in a safe place so that this information is available to you when you
need it.
1. Start-up
Inserting the batteries:
Open the battery compartment cover on the underside of the scales and insert the
provided batteries (2 x 1.5V AA). Please be mindful of the correct polarity of the batteries
(+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents or
abrasive cleaning products. Do not immerse in water. All plastic
parts of the scales should be cleaned immediately after contact
with fat, spices, vinegar and other strongly seasoned and coloured
foodstuffs. Avoid contact with citric acid.
2. Operation
Activating the sca les:
Place the scales on an even and firm surface. The scales are operated using highly
sensitive sensor buttons. To activate the scales, briefly touch the
the display. "HI" will first appear on the display. After the scales have stabilised, "0 g" or
"0: 00 lb: oz" will appear depending on the settings. The scales are now ready for
weighing.
Plea se note: If, after activating the scales, a weight-value is displayed, touch the TARE
button to set the scales to zero.
Units of weight:
To change the unit of weight (g <->lb: oz) activate the scales by touching the
As soon as "HI" appears on the display, touch the
has now been changed. Please make sure that the scales are set to the unit of weight
relevant to you.
Zeroing-(Tare)-func tion:
By touching the TARE button you can set the scales to "0 g". Place, for example, a bowl
-button to the right of
-button.
-button again. The unit of weight
2
on the weighing platform, press the TARE button and thus set the scales to "0 g" again.
This process can be repeated as often as you like until the total capacity of the scales
(5 kg) is reached. After removing the weighed item the total weight will be displayed as a
negative value.
Automatic / manua l deactivation of the sca les:
If the displayed weight does not change within approx. 20 seconds, the scales
automatically deactivate. In order to conserve battery power, you can deactivate the
scales manually by holding down the
3. Error messages
"Lo"
=
Display battery empty – please replace the batteries with the battery type
intended for your scales (2 x 1.5V AA).
"O-Ld"
=
Overload indicator – max. capacity of scales 5kg has been exceeded.
Remove the load from the scales immediately, otherwise the load cell
could be damaged.
4. Technical Data
Weight-bearing capacity x division:
Dimensions:
Batteries:
We reserve the right to make technical modifications in the course of further development.
6. Warranty
ADE guarantees the free correction of defects resulting from material or manufacturing
faults through repair or exchange for 3 years from the purchase date. Please get your
warranty section filled out and stamped by the retailer when you make your purchase. In
case of warranty, return the scales to your retailer along with the warranty section
indicating the reason for your complaint.
CE compliance
This device suppresses electromagne tic interferen ce in
accordan ce withthe applicable EC direc tive 2004/108/EG
Please note: Under extreme electromagnetic influences e.g. when operating a radio
device in immediate proximity to the scales, the indicator value may be affected. After the
disturbing influence has stopped, the product may once again be used as intended,
although a re-activation may be necessary.
-button for approx. 2 seconds.
Max. 5 kg x 1 g
131 mm x 179 mm x 23 mm
2 x 1.5V AA (contained in product package)
3