Dux 160F2 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Calentador de agua Dux 160F2. Dux 160F2 13 páginas. Proflo and marathon electric storage water heaters

Imprimir página

TEMPERATURE ADJUSTMENT PLUG

(USER ADJUSTABLE MODELS ONLY)

ISOLATING VALVE

(SPINDLE VERTICLE)

COLD WATER

INLET

LINE STRAINER

NON RETURN VALVE

NOTE: A COMBINED ISOLATING VALVE/NON RETURN

VALVE/LINE STRAINER MAY BE USED

PRESSURE & TEMPERATURE RELIEF VALVE

The Pressure & Temperature relief valve is supplied loose with the water heater. The

valve rating is:

• 25 to 160L Models

• 250 to 400L Models -

The relief valve must be installed directly into the top socket marked "RELIEF VALVE".

The drain line from this valve must be installed in a continuously downward direction in a

frost free ambient position with the discharge end left open to atmosphere permanently.

The Pressure & Temperature Relief Valve supplied with the water heater is not sufficient to

enable connection of the water heater to supplementary energy sources such as solar

panels or slow combustion stoves (refer AS/NZS 3500.4.2 for guidance on these types of

installations)

Note: Plugs are supplied with the water heater to plug off the fittings that are not required.

Ensure that a sealing material is applied to the plugs for a leak tight fit.

INSTALLATION DIAGRAM

ANODE ACCESS THROUGH PLUG

DATA PLATE

HOT WATER

OUTLET

TEMPERATURE

AND PRESSURE

RELIEF VALVE

DRAIN

ELEMENT COVER

EXPANSION VALVE ONLY

REQ'D WHERE LOCAL

REGULATIONS DEMAND.

DRAIN

UNION CONNECTION

Figure 1: Installation Diagram

1400kPa

1000kPa