AGRI-COVER ACI SRT-2 Manual de instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para tractores AGRI-COVER ACI SRT-2. AGRI-COVER ACI SRT-2 8 páginas.
También para AGRI-COVER ACI SRT-2: Manual de instrucciones de instalación (8 páginas)

Imprimir página

PREPARATION

• Prior to tarp system assembly, park truck or trailer on level ground.

• Box must be square and straight, center must not be pulled together or spread apart.

• Remove or grind smooth any sharp edges or points contacting tarp and/or cables.

• Remove or reposition any interferences with motor. If modifications to box are

needed, consult box manufacturer.

• Ensure box extension is secure by bolting in place on top of your box.

TOOLS NEEDED

• (2) 1/2" Wrenches

• 9/16" Wrench

• Step ladders or scaffolding

• Drill with 5/16" and 3/8" bits

• Tape measure

• Hammer

• Protective eyewear

• Cutting tool

• Marking pencil

NOTE: Hardware appearance and components may vary.

CAUTION: Before drilling, ensure there are no hidden wires or gussets in line

with holes to be drilled.

CAUTION: To avoid galling of stainless steel hardware, use anti-galling

spray, grease or lubricant on threads and avoid high speed when fastening.

Do not use impact tools for stainless steel hardware.

3/8" x 1" non-stainless steel self-threading bolts: Use to cut threads into 5/16"

holes. Drill 5/16" hole. Turn 3/8" x 1" self-threading bolt in hole to cut threads, then

turn back out.

STAINLESS STEEL ONLY