AusClimate AU1000DD Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Deshumidificador AusClimate AU1000DD. AusClimate AU1000DD 13 páginas. Ausclimate cool seasons premium 10l desiccant dehumidifier
También para AusClimate AU1000DD: Manual del usuario (13 páginas)

AusClimate AU1000DD Manual del usuario
OPERATING INSTRUCTIONS
ON and OFF
Connect the power plug to the appropriate electrical socket outlet.
Press the ON/OFF button to turn the unit ON.
Press the ON/OFF button again to turn the unit OFF.
Note: In the event of a power failure
Once the power is restored after a power failure, the unit will
continue to operate at the selected settings prior to the power
failure. This includes the drying mode, swing function and time
remaining in timer mode.
Note: After turning the appliance OFF
After turning the unit OFF using the ON/OFF button, the fan will
continue to run for a two-minute period. This is a normal procedure
and helps to cool & protect the internal components.
During this two-minute period, DO NOT remove the power plug from
the power socket outlet; wait for the fan to stop running.
DRY MODE
Press the "DRY MODE" key for dehumidification (general drying of your home or office).
AUTO
MODE
AUTO
LOW
HIGH
Note: There may be times when the fan speeds are the same for AUTO and LOW.
AUTO itself is not a fan speed but a target relative humidity set point that uses
either the low or high fan speeds to reach its target of 50-55%RH.
If the relative humidity of the room is close to or within this range, then switching
between LOW and AUTO will make no difference to the fan speed.
5
LOW
HIGH
DESCRIPTION
To keep the room at a comfortable relative humidity (RH)
level
The unit automatically keeps room humidity around
50~55%RH with automatic high or low fan speed.
To run low fan speed
The unit automatically keeps room humidity around
50~55%RH with low fan speed and low heater.
Super dry mode to prevent damp, condensation & mould
The unit automatically keeps room humidity around
40~45%RH to achieve quicker and efficient drying with
high fan speed and high heater.