ausdom M09 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Auriculares ausdom M09. ausdom M09 13 páginas.

4. Charging the Battery

Connect the micro USB charging cable to any power source

and the USB interface located on the side of ear cup for

charging. The headphone LED turns to solid red during

charging. It takes about 2 hours for the first charge and after

charging for as long as 1-1.5 hours. When the battery is fully

charged the LED turns off.

You can also use the Wireless function during charging but will

extend the charging time. If you use the audio cable or turn the

headphone off for charging that will not affect the charging

time.

When the battery is low, the LED keeps red light. At the same

time the headphone also provides a low battery warning tone.

Note: It is strongly recommended fully charging for the first

use. Playtime varies according to volume level and audio

content .

5. Pairing with Wireless Devices

5-1 Pairing the headphone with a computer

Before pairing the headphone with your computer, please

make sure your computer or laptop has the built-in Wireless

feature. If not, you must purchase a Wireless dongle, preferably

version 2.1 or above.

1.Make sure the headphone is off.

2.Start the Wireless program in the computer.

3.The "Search new device" screen will be displayed.

4.Do not place both devices more than one meter away from

each other.

5.Press and hold the power button on the headphone until it

powers on but don't let go just yet. Continue holding down on

Micro USB charging cable to

the USB Interface for charging

EN-2

Any power

source for USB use