DV Signage Openframe VF-215W-OF Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Monitor DV Signage Openframe VF-215W-OF. DV Signage Openframe VF-215W-OF 14 páginas. Tft lcd color monitor dv signage 21.5'' videoflyer vf-215w; openframe vf-215w-of

Imprimir página

Simple play mode, i.e. files copied to Compact Flash without using DV Studio:

In simple play mode, the user just copies all video files (.mpg) or JPEG files (.jpg)

onto the Compact Flash card. The VideoFlyer will play these files in alphabetical

sequence.

For JPEG files, the play time is determined by the last digit of the filename. (For

example: APPLE5.mpg, where "5" means the track will be displayed for 5 seconds.)

Note: Do not use the same filename on both MPEG and JPEG.

Note: Make sure all capital letters in a filename defined in playlist are consistent with the

filename on CompactFlash card. All filenames should be in 8+3 format (i.e. xxxxxxxx.xxx) and

avoid using any characters like "~", "_", "-", etc. All content files must be stored within a folder

name MEDIA. (i.e. /Media/)

3.6 Configuration mode

In Configuration mode, you may set Master volume level, Unit ID, Date, Time and options for

Datalog/OSD, etc.

To enter the Configuration Mode, holding L1 key and power up.

Button 8

Holding the button

The volume setting can be adjusted when the configuration mode is enabled.

Press L1 key + power up

Press L1 key

Press L2 key

Press L3 key

VOLUME

VER 4.10

Power on

Y M

2004 .10 .12

ID NO: 0712

DATA LOGGING: ON

OSD: ON

SAVE AND EXIT

Config. Mode menu

: Config. mode enable.

: Select

: Increase / Save and Exit

: Decrease / Save and Exit

15 : 48 : 44

Page 8 of 14