4ms Company Matthias Puech Ensemble Oscillator Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación 4ms Company Matthias Puech Ensemble Oscillator. 4ms Company Matthias Puech Ensemble Oscillator 19 páginas.
Imprimir página
Learn button
The Learn button is used to create and save custom scales. Pressing this button enters Learn mode,
indicated by the button turning red. If you enter Learn mode by accident, just press the button again to
Learn
exit with no changes.
Learn mode allows you to create a new scale and save it into one of the 30 scale slots. Custom scales
can be recalled even after you power the module down.
See Tutorial 2: Create Your Own Scale with Learn Mode (page 9), and the Learn Mode section (page
14) for details.
Learn jack
The Learn jack is used in Learn mode to input notes in a scale. A CV/Gate keyboard or sequencer can
be patched into the Pitch and Learn jacks. Each time the Learn jack receives a trigger or gate, the
Pitch jack will be read and used to create a new note in the scale. See Tutorial 2: Create Your Own
Learn
Scale with Learn Mode (page 9), and the Learn Mode section (page 14) for more details on using this
jack.
Outside of Learn mode, the Learn jack is not used (any gates received by this jack are ignored).
Freeze
Freeze button and jack
The Freeze feature allows you to "freeze" a subset of oscillators while the remaining oscillators behave
normally. A frozen oscillator will not respond to changes in its frequency via the Pitch, Root, Spread,
Delete Note
Scale or Detune knobs or jacks. However, frozen oscillators will still respond to waveform and mixing/
Shift
Shift
panning changes via the Twist, Warp, Cross FM, and Balance knobs and jacks. The
and
# Oscillators
Freeze
frozen oscillators.
When the Freeze button is pressed or a trigger is detected on the Freeze jack, certain oscillators will
freeze at whichever frequency they happen to be at that moment. The Freeze button will turn blue to
indicate that some oscillators are frozen. Pressing the button again or firing a trigger into the jack will
unfreeze the oscillators and the button will turn back to its normal yellow color.
The subset of oscillators which get frozen is determined by the
three options: freeze only the lowest (root) oscillator, freeze the bottom subset of oscillators (e.g. 1–8 if
16 oscillators are enabled), or freeze the odd-numbered oscillators. See the Freeze Mode section (page
16) for a complete discussion.
The Freeze button is also used to access the
of the knobs that has a
modify the shift parameter instead of the main parameter. See the Shift Features section (page 15).
shift functions allow you to adjust the panning and the enabled/disabled state of
Shift
feature
(#
Oscillators, Crossfading,
Page
8
Freeze Mode
Shift
features. Holding down this button while turning one
of
19
Stereo Mode
shift function. There are
Stereo
Mode,
Freeze
Mode) will