FriendlyARM NanoPi NEO Plus2 Manual - Página 10

Navegue en línea o descargue pdf Manual para Placa base FriendlyARM NanoPi NEO Plus2. FriendlyARM NanoPi NEO Plus2 13 páginas. Arm board

Open the file "/etc/wpa_supplicant/wpa_supplicant.conf" with vi or gedit and append the following lines:

network={

ssid="YourWiFiESSID"

psk="YourWiFiPassword"

}

The "YourWiFiESSID" and "YourWiFiPassword" need to be replaced with your actual ESSID and password.

Save, exit and run the following commands your board will be connected to your specified WiFi:

ifdown wlan0

ifup wlan0

If your WiFi password has special characters or you don't want your password saved as plain text you can use

"wpa_passphrase" to generate a psk for your WiFi password. Here is how you can do it:

wpa_passphrase

YourWiFiESSID

Following the prompt type in your password. If you open the file "/etc/wpa_supplicant/wpa_supplicant.conf" you

will find that your password has been updated and you can delete your clear-text password.

Connect NanoPi NEO Plus2 to USB Camera(FA-CAM202)

The FA-CAM202 is a 2M-pixel USB camera module. Boot your NEO Plus2, connect it to the internet, log in the

system as root, compile and run the mjpg-streamer utility:

10/13