4ms Company Listen Four Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Mezclador de música 4ms Company Listen Four. 4ms Company Listen Four 7 páginas. Four channel stereo mixer

Imprimir página

Connecting to the WAV Recorder

WAV Recorder

The

just has an

useful for making a recording of the main mix. Since the

Listen Four

the

's switch can be set to either Line or Mod. The

adjusted to the maximum recording level without clipping. Adjusting this knob will not effect the output level of the

Listen

modules.

In the photo above, two

headers. This creates an eight channel mixer with a stereo recording of the main mix.

The photo on the right shows a

twelve channel mixer with stereo

recording of the main mix.

Patching into any of the twelve

channels will pass the signal to

the 1/4" outputs, as well as the

WAV Recorder.

No cables

need to be patched between

Listen

modules. Each

module's

Main Level

knob controls the

sub-mix level of its four channels

plus the module to the left of it.

The sub-mix can be taken simply

by patching into the Left and

Right output jacks on the

Four

modules. The headphone

jack on these modules can also

be used to cue or monitor the

sub-mix.

INS

header, and so it can only be connected at the end of a daisy-chain. This is

Listen Fours

WAV Recorder

and a

Listen

Twelve channel mixer with two four-channel sub-mixes, 1/4" balanced stereo

outputs and stereo recording directly from the main mix. Each sub-mix has a

headphone jack with independent level for cueing.

WAV Recorder

can accept line or modular level signals,

Input Gain

knob on the

are daisy-chained by connecting the

Page

WAV Recorder

can be

OUTS

INS