DV8 OFFROAD FDJL-07 Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles DV8 OFFROAD FDJL-07. DV8 OFFROAD FDJL-07 10 páginas. Slim fenders 2018+ jeep wrangler jl

Imprimir página

INSTALLATION

MANUAL

STEP 16 |

To use the nutsert tool,

slider the M6 washer and spacer onto the

provided M6x50 bolt.

Then install a nutsert onto the exposed

threads by hand.

STEP 17 |

Slide the nutsert tool

with the nutsert into the mounting hole.

Ensure the flange of the nutsert is flat

against the vehicle prior to tightening.

STEP 18 |

Use a 13mm wrench to

hold the spacer while tightening with

a 10mm socket. Tighten slowly until

the nutsert is set properly. Do not over

tighten.

Nutsert should be "crushed" against the

inside of the fender so that it is tight and

secure.

When finished remove the nutsert tool

using a 10mm socket and repeat as

needed.

Note: Be sure to hold the spacer tight so it does

not move and scratch paint.

NEED HELP?

855-680-9595