Convoy Technologies Performance Series Manual del propietario y de instalación - Página 5
Navegue en línea o descargue pdf Manual del propietario y de instalación para Monitor Convoy Technologies Performance Series. Convoy Technologies Performance Series 7 páginas. Lcd color monitor
Imprimir páginaOwner's / Installation Manual
Performance Series
Mounting the Monitor
1) Select a location allowing 2" space between monitor and walls, cabinets, or other objects to allow adequate air circulation
around it. Avoid enclosed spaces, areas with excessive vibration or subject it to severe impacts.
2) Never use this device in environments with excessive moisture, dust or smoke
pinched or stepped on. Monitor is not designed to be waterproof.
3) The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
4) Make sure all cables are connected properly, observe polarity. Improper cable connections may damage the monitor. Remove
the power cable connections when you do not intend to use the unit.
M7204RF Harness:
•
Red and Black—Power (12-24VDC) and Ground
•
Green—Trigger Wire for Channel 1
•
White—Trigger Wire for Channel 2
•
Yellow—Trigger Wire for Channel 3
•
Blue—Trigger Wire for Channel 4
Installation Notes: Trigger wire function
•
Cycle between either CAM 1, CAM 2, CAM 3, CAM 4. When the trigger wire is energized, the monitor automatically switches
to view THAT Camera. When voltage is removed from the trigger wire, monitor returns to previous view. The Monitor only
has one RF receiver, so it can only view one wireless camera image at a time.
•
If the monitor is off, when the trigger wire is energized, the monitor will turn on to show THAT Camera. This safety feature is
particularly useful for night driving, as the monitor light can be distracting to the operator.
•
To get the camera into "Pairing Mode" hold the Pairing button 6 seconds. Hold the "Pair" button on the M7204RF 3 seconds.
The monitor will start counting down from 50 sec, and when it finds and pairs with the camera, you will see "SAVE DATA" on
the screen, then the picture from the camera.
M7204RF
Convoy Technologies Inc.
6409 Highview Drive, Fort Wayne, IN, 46818 USA
.
Do not place cables where they may be