Agri-Fab 45-02101-101 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Esparcidor Agri-Fab 45-02101-101. Agri-Fab 45-02101-101 12 páginas. Pro 125# broadcast spreader
También para Agri-Fab 45-02101-101: Manual del usuario (12 páginas), Manual del usuario (12 páginas)
Imprimir páginaFor Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
18. Assemble the flow control arm to the flow control mount-
ing bracket using one 1/4" x 5/8" hex bolt and one 1/4"
hex lock nut. Do not over tighten. The flow control arm
must pivot freely. See figure 7.
19. Hook one end of the spring through the hole at the bend
in the flow control rod. Hook the other end in the hole in
the flow control mounting bracket. See figure 7.
FLOW CONTROL ARM
FLOW CONTROL
MOUNTING BRACKET
FLOW
CONTROL
ROD
EXTENSION
SPRING
1/4" HEX LOCK NUT
FIGURE 7
20. Place a 5/16" flat washer over the end of flow
control rod and insert the rod through the slot in the
flow control mount bracket and through the hole in
the flow control link. Secure with a 3/32" x 3/4"
cotter pin. See figure 8.
FLOW
CONTROL
ROD
EXTENSION
SPRING
5/16" FLAT
WASHER
FLOW CONTROL
MOUNTING BRACKET
FIGURE 8
1/4" x 5/8"
HEX BOLT
FLOW
CONTROL
LINK
3/32" x 3/4"
COTTER
PIN
6
www.mymowerparts.com
21. Hook the free end of the flow control rod through the hole
in the slide gate bracket located near the bottom of the
hopper. See figure 9.
HOPPER
FIGURE 9
22. Assemble the flow control mounting bracket and the
short handle tube to the long handle tube using two 1/4"
x 1-3/4" hex bolts, two 5/16" flat washers and two 1/4"
hex lock nuts. See figure 10. Do not tighten yet.
23. Place a handle grip on each handle tube. See figure 10.
FLOW CONTROL
1/4" x 1-3/4"
MOUNTING BRACKET
HEX BOLTS
5/16"
5/16"
FLAT
FLAT
WASHERS
WASHERS
HANDLE
TUBE
HANDLE
(SHORT)
TUBE
(LONG)
FIGURE 10
SLIDE
GATE
BRACKET
FLOW
CONTROL
ROD
1/4" HEX
LOCK NUTS
HANDLE GRIP