Aussie Mobi-blaster BB 351 Manual de instrucciones del operador - Página 4

Navegue en línea o descargue pdf Manual de instrucciones del operador para Lavadora a presión Aussie Mobi-blaster BB 351. Aussie Mobi-blaster BB 351 20 páginas. Professional high pressure water blaster

Imprimir página

Aussie Pumps

ASSEMBLY AND PREPARATION FOR USE

Before proceeding with assembly of your new Aussie

high pressure water blaster, check that all parts listed

below are included.

1 x gun handle assembly



1 x high pressure hose



1 x dual lance & nozzle assembly



HEAVY DUTY LANCE: To assemble the gun/lance,

screw together and check nozzles have been fitted to

end of lance.

Machine Preparation (initial start-up)

Check the oil in the pump and gearbox.

Note separate reservoirs. With the machine on

a level surface the oil lever should cover the red

spot in the oil level sight glass on the side of the

machine. If necessary, top up with SAE 75W-90.

Aussie Safety Protection Kit

Detergent injector

HP hose

connection

Supply hose

connection

Unloader -

factory set,

DO NOT adjust

Aussie Mobi-blaster ... Operator's Instruction Manual

Do not mix different grades of oil as this may

affect the machines performance. If alternative

oil is used, first empty out oil by unscrewing

drain plug in bottom of machine.

Breather plug

Ensure breather plug is fitted to pump.

WARNING:

Before

mounted travel plug is replaced by breather

plug. Failure to fit breather and keep clean can

result in over pressuring of oil chamber (crank

case) and can blow oil seals.

warranty.

Note that the gearbox has a separate oil

reservoir. Gearbox oil is SAE 90 gear oil.

Connect

battery

machines.

Check oil level in engine and fill with proper

grade oil if necessary. (SAE 10W-30 for Honda

engines, check engine manual for other makes)

Check fuel level and fill if necessary. (unleaded

petrol)

Safety valve

Thermal dump

Sept 2016

operation

ensure

This will void

leads

electric

start

top