Datatool DT201 Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad Datatool DT201. Datatool DT201 15 páginas.
Imprimir página•
Loud (3 Bleeps).
7.
Turn off the ignition to exit programming and save the new setting a loud chirp will be
given. If the ignition is not switched off within 30 seconds the DT201 will give a loud
chirp and the currently selected setting will be stored.
To adjust the Automatic Rearm
1.
Disarm the DT201.
2.
Turn on the ignition.
3.
Within 10 seconds, press and hold both buttons on the remote control.
4.
After 3 seconds the DT201 will start to chirp loudly. Release the remote control buttons
after two chirps, if you miss the correct chirp wait for the alarm to exit programming
mode after the seventh chirp or turn off the ignition a loud chirp will be given to indicate
programming has been exited.
5.
The DT201 will bleep a specified number of times to indicate the current setting, the
LED will flash the current setting repeatedly.
6.
Press the Arm/Disarm or Programming button on the remote control to cycle through
the automatic rearm options:
•
Off (1 Bleep) (Default).
•
On (2 Bleeps).
7.
Turn off the ignition to exit programming and save the new setting a loud chirp will be
given. If the ignition is not switched off within 30 seconds the DT201 will give a loud
chirp and the currently selected setting will be stored.
To adjust the Passive Arming time
1.
Disarm the DT201.
2.
Turn on the ignition.
3.
Within 10 seconds, press and hold both buttons on the remote control.
4.
After 3 seconds the DT201 will start to chirp. Release the remote control buttons after
three chirps, if you miss the correct chirp wait for the alarm to exit programming mode
after the seventh chirp or turn off the ignition a loud chirp will be given to indicate
programming has been exited.
5.
The DT201 will bleep a specified number of times to indicate the current setting, the LED
will flash the current setting repeatedly.
6.
Press the Arm/Disarm button on the remote control to cycle through the automatic arming
options:
• Off (1 Bleep) (Default)
• 30 second delay (2 Bleeps)
• 60 second delay (3 Bleeps)
7.
Turn off the ignition to exit programming and save the new setting a loud chirp will be
given. If the ignition is not switched off within 30 seconds the DT201 will give a loud
chirp and the currently selected setting will be stored.
Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE
Tel: +44 (0) 1257 249928 E mail:
Datatool is a brand of Scorpion Automotive Ltd
DT201 Operation Guide Revision 1 24-07-2023
Web: http://www.datatool.co.uk
10