Datatool DT201 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad Datatool DT201. Datatool DT201 15 páginas.

3. Align the two casing halves and squeeze firmly to click the casing back together, ensuring the

joint is even around the perimeter.

Operating the DT201 Basic Functions

Arming (turning the DT201 on) and disarming (turning the DT201 off) are the most common

interactions and can be performed with a single button operation on the remote control.

Arm/Disarm button

Programming button

Arming the DT201

To manually arm the DT201 with the motorcycle ignition switched off press the Arm/ Disarm button

on the remote control once. The indicators will flash twice and if arm/disarm tones are enabled, a

double chirp will be heard.

The dedicated alarm LED in the motorcycle instruments will illuminate for 3 seconds and then

flash once every second for a further 10 seconds whilst the system initializes the tilt sensor and

trigger inputs. After 10 seconds, the DT201 is fully armed, and the motorcycle LED will flash at a

rate determined by the motorcycle battery voltage (see Battery Monitoring).

Disarming the Alarm

To disarm the DT201 press the Arm/ Disarm button once. The indicators on your motorcycle will

flash once to confirm the DT201 has disarmed and if the audible chirps are enabled, a single chirp

will be heard, if the alarm system has triggered during the armed state then the siren will sound a

chirp followed by a diagnostics sequence (see Diagnostics). The motorcycle ignition can now be

turned on without triggering the DT201. The DT201 cannot be re-armed within 3 seconds of

disarming. On disarming of the alarm system, the alarm LED will remain solid to indicate the alarm

system will enter either Passive Immobilisation or Automatic Rearming will occur.

With Passive Arming enabled there is no need to press the Arm/Disarm button to arm the

DT201. Once the motorcycle ignition is switched off the DT201 the alarm LED will illuminate

solid to indicate Passive Arming is enabled and the alarm system will fully arm after the chosen

delay period, which can be chosen by the user from 30 seconds or 1 minute. The indicators will

flash twice and if arm/disarm tones are enabled, a double chirp will be heard automatically

arming.

Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE

Tel: +44 (0) 1257 249928 E mail:

Datatool is a brand of Scorpion Automotive Ltd

DT201 Operation Guide Revision 1 24-07-2023

Web: http://www.datatool.co.uk