ADE M600620 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE M600620. ADE M600620 16 páginas. Electronic bed scale

Imprimir página

The setting mode is not made for metrological parameters. Access the function menu by pressing the CLEAR

(13) key until TIME appears on the display. Use the key pad (13) to navigate within the menus, to select numer-

ical values and to increase or lower the values. Press the ENTER key to save the values entered and to return

to the super ordinate menu level.

Menus structure of setting mode:

After entering the clear button following options are available and appear on the screen when moving with the

navigation buttons:

FILTER

SERIAL

Setting date and time

–

Enter the CLEAR key for approx. 4 sec; FILTER appears on the display.

–

Press key "6" six times and TIME appears on the display.

–

Press ENTER key and SHOW appears on the display.

–

Press key "6" one time and HOUR appears on the display.

–

Press ENTER key and set the hours using the arrow keys "2", "4", "6" and "8".

–

Press the ENTER key and set the minutes and seconds.

–

Go back by pressing key "2"; TIME appears on the display.

–

Press key "6" one time and DATE appears on the display like the time entry.

–

Press key "2" two times and EXIT Y appears on the display.

–

Confirm with ENTER and date & time are set.

Modes of operation

 Weighing mode

The "weighing mode" is of course the standard mode of your scale. After initial configuration and sealing (by

attaching a calibration sticker to the back of the unit), the ADE-scale can only be operated in this mode.

 Setting mode

Date, time and consecutive numbers for print commands are being set in this mode. To start setting mode, hold

the GROSS/NET key pressed until TIME appears on the display.

 Configuration mode (set-up mode)

The values for different parameters including the calibration could be set in the configuration mode. This function

is for authorized service personnel only.

 Test mode

There are different diagnostic functions for the ADE-MAK in test mode. This is for service personnel only.

Manipulations to test and configuration modes can revoke the calibration status and will result

in loss of warranty!

PROGR

PFORMT

SETPTS

TEST

TIME

Operation

DATE

VERS

M600620-210422-Rev006-UM-e