ADE PFA Series Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE PFA Series. ADE PFA Series 15 páginas. Electronic precision scale

Battery Alert

It is also possible to provide the scale with voltage via the integrated battery.

Should the voltage be too low the battery symbol in the display will indicate.

The batteries should be charged or exchanged immediately.

It is possible to set a plenty of presetting.

Press and hold the „Zero-Button" while turning on the

scale to get into the presetting mode.

The scale will switch to presetting mode without

running the test routine.

Press PCS-button to change the value from left to

right.

Press the UNIT-button, to enter the next parameter.

Press PRN-button in order to save settings.

The scale will run the test routine and change to

weighing mode.

All presetting which are not described in the consecutively details may be

conducted by authorized personnel only.

You may set a minimum and maximum weight. An acoustical alarm sounds if the weight of the

weighing good is below the entered minimum value or above the maximum value.

The minimum value has to be lower than the maximum value.

Start the presetting mode as described before.

Set the minimum value.

Press PCS-button to change the value from left to right.

The value you want to set is blinking.

Press „-0-"-button to increase the value by one.

Press „TARA"-button to decrease the value by one.

Press the UNIT-button to save the presetted value and

change to the next step.

PFA-200702-Rev004-UM-en

PRESETTING OF THE SCALE