ADE PFA6000 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE PFA6000. ADE PFA6000 15 páginas. Electronic precision scale

Setting up the maximum weight

Start the presetting mode as described before.

Press the UNIT-button until correspondent menu appears.

Set the maximum value.

Press PCS-button to change the value from left to right.

The value you want to set is blinking.

Press „-0-"-button to increase the value by one.

Press „TARA"-button to decrease the value by one.

Press the UNIT-button to save the presetted value and change to the next step.

If a minimum and maximum weight has been entered an acoustical signal may be activated.

The sound will appear as long as the weighing good is below the minimum value and above the

maximum value.

Start the presetting mode as described before.

Press the UNIT-button until correspondent menu appears.

Press the PCS button, to activate or deactivate the alarm.

ON means Alarm is active, OFF means Alarm is not active.

Press the UNIT-button to save the presetted value and change

to the next step.

Start the presetting mode as described before.

Press the UNIT-button until correspondent menu appears.

Press the button PCS to activate or deactivate the auto shut

off mode

ON means active, OFF means deactive function.

In case the auto shut off mode is activated the scale will

automatically shut off after 90 seconds.

To use the scale after auto shut off the scale has to been

turned on again.

Press the UNIT-button to save the presetted value and change to the next step.

Presetting of communication address

There are address no. 1-26 for setting available.

Presse ZERO to increase the number by one or press

TARE to decrease the number by one.

To confirm press PRN.

Press the UNIT-button to save the presetted value

and change to the next step.

PFA-200702-Rev004-UM-en