Datecs Linea Pro 5 Manual del usuario - Página 17
Navegue en línea o descargue pdf Manual del usuario para Lector de códigos de barras Datecs Linea Pro 5. Datecs Linea Pro 5 18 páginas.
También para Datecs Linea Pro 5: Manual del usuario (20 páginas)
Imprimir página1 DATECS
Turn off device function
When is pressed this turn off, LineaPro 5 Industrial is going to sleep mode immediately.
Charging Apple device
LineaPro 5 Industrial can charge Apple device, when power source (USB adapter) is attached to USB
connector or LineaPro 5 Industrial is placed on Datecs charging station. Charging Apple device can be
at LOW and HIGH power and depends on the battery charging state and power source.
External Power supply*
500mA
1000mA
1500mA
>1500mA
*Maximum current which can provide the power supply
NONE – 0A
LOW – 500mA
HIGH – 1000mA
LineaPro 5 Industrial can charge Apple device from his own battery. Only is need to be activated
function "Automated Charge", to be start charging battery level of LineaPro 5 Industrial must be above
20%.
Updating Firmware
Firmware of LineaPro 5 Industrial can be update with newer version. Press "Update Firmware" from
application, first will be shown current firmware version and to which version can be updated, then
press update.
Firmware of LineaPro 5 Industrial barcode engine can be update with newer version. Press "Update
Barcode Engine Firmware" from application. First will be shown current firmware version and to which
version can be updated, then press update.
UM 07.01.19/v1.0.0
LINEAPRO 5 INDUSTRIAL
When Linea battery is
charging, can be provided
current to Apple device:
NONE
LOW
LOW
HIGH
USER MANUAL
When Linea battery is
charged, can be provided
current to Apple device:
LOW
HIGH
HIGH
HIGH
17