Datecs LineaPro 11 Industrial Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Lector de códigos de barras Datecs LineaPro 11 Industrial. Datecs LineaPro 11 Industrial 15 páginas.
Imprimir página
1 DATECS
GETTING STARTED
LineaPro 11 Industrial has rechargeable Li-ion battery. Can be charge from USB port or External
features connector. Power source can be variable from USB wall adapters, Datecs power stations.
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
4 hours and 30min (for more details please refer to the table below).
LineaPro 11 Industrial battery always start to charge when external power was provided. Charging
stops when battery is fully charged. Charging power can be "LOW" and "HIGH" and depends on Apple
device connection state. (valid for firmware version 01.05.68.64)
External Power supply*
500mA
1000mA
>1000mA
*Maximum current which can provide the power supply
LOW – 350mA
HIGH – 580mA
Charging form USB adapter:
UM 07.01.34/v1.1.0
LINEAPRO 11 INDUSTRIAL
Apple device connected
LOW
LOW
HIGH
USER MANUAL
Apple device disconnected
LOW
HIGH
HIGH
9