Datel TurboFire Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Mando de videojuegos Datel TurboFire. Datel TurboFire 4 páginas. Wireless controller for ps3
También para Datel TurboFire: Manual del usuario (10 páginas), Manual del usuario (4 páginas)

Imprimir página

5. Using the Controller

Before you can use the TurboFire Wireless Controller for the first time you need to

You only need to pair the controller with your system once.

Step 1: Pair the Controller

Switch the console on and then connect the controller to it using the supplied

USB cable. Press the 'PS' button to pair the two devices.

Step 2: Activate the controller

After pairing or resetting the console you need to activate the controller so that it

is assigned a player number. To do this, wait for the console to boot and then

press the PS button once.

The player number indicator lights will flash briefly and then settle on a number.

The LED that stays illuminated is that controller's player number.

Switch the PS3 on

(the power light will be solid green)

6. Using the Turbo Rapid Fire Function

The TurboFire Wireless Controller is equipped with a unique programmable

Turbo Rapid Fire function that can boost your firepower in any PS3 game. The

Turbo Rapid Fire function has 3 speed settings and can be assigned to a wide

range of buttons.

Step 1: Choose Rapid Fire Buttons

By default, Turbo Rapid Fire is assigned to the R2 button but different games will

use different buttons for actions like jump, shoot, block etc. In order for you to

get the most out of the rapid fire function you can choose exactly which button or

buttons it is assigned to.

To program which buttons will use rapid fire, press and hold the TURBO button

and then any one of the buttons shown in the illustration below. When you have

made your selection, release the TURBO button. Turbo Rapid Fire can be

enabled on the following 8 buttons:

Press one or more of these buttons

L2 Button

L1 Button

Press and

Hold Turbo

The TurboFire Wireless Controller will remember this configuration until the

batteries become flat or are removed or the process is repeated to configure a

different set of buttons.

R2 Button

R1 Button

Button