Dateq MusiCall MPM8.16 Manual del usuario - Página 20

Navegue en línea o descargue pdf Manual del usuario para Mezclador de música Dateq MusiCall MPM8.16. Dateq MusiCall MPM8.16 20 páginas.

Configureren

MusiCall gebruikers handleiding

Configure inputs

Temporarily unused inputs can be made inactive within the system. Whilst scrolling

through the available inputs, the inactive inputs will be neglected.

This can be useful when audio inputs temporarily are disconnected.

When the menu is operational, active inputs will light up green, inactive inputs will

light up red.

An input will be activated by pushing the input button (1...8).

The light will light up green, and the name of the input will be shown in the display.

If connected to a keyboard, the name of the input can be changed. The new name is

saved by pushing the <enter> button.

Pushing the same input-button again, and the attenuation of the input signals can be

adjusted with the A and B buttons.

The input attenuation function makes it possible to adjust the input level from sources

like CD players which normally have a higher output level than sources like tuners for

instance. The higher the value of attenuation, the lower the volume.

In this menu, the lights will light up red, when there is no WallUnit connected to that

specific zone. The light will light up green if connected to a WallUnit.

Push a zone button to configure the output. The display shows the name of the

output. This name can be modified if connected to a keyboard.

Push on <enter> to store the new name. Within the same menu, the maximum

volume can be adjusted by pushing the A and B buttons. All paging messages will be

given at the maximum volume level.

By pushing the zone button again the default volume level can be stored.

This is the volume level that is active when powering up the system.

Push the zone button again, and the default source can be chosen by buttons

A and B. This source will be activated when the unit is powered up.

Push the zone button again to store the setting.