Dateq LPM 7.3 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Dateq LPM 7.3. Dateq LPM 7.3 13 páginas.

Internal attenuator

Each input-module has an internal attenuator to prevent the input-signal from being distorted. By

default the attenuator is disabled (potentiometer turned clockwise).

When more attenuation is needed the LPM7.3 has to be opened. The attenuation can be adjusted

for each input-module separately. Max. internal attenuation is 40dB.

Master

The master section has volume controls for the various outputs of the LPM 7.3 and a 2 x 40

segments LED-bar meter which precisely indicates the Master or PFL signal level.

Meter section

2 x 40 segments LED-indication of the Master or PFL level. An operation level of

METER

approximately 0dB is normal.

Operation

POWER

STEREO/MONO All master outputs can be switched

METER

EFFECT

PFL

MASTER

MON

PFL

PHONES

MASTER

Dateq LPM 7.3 Manual

Mains power switch.

between stereo and mono with this

button.

Button to switch the meter between the

master or the PFL-signal. When the LED

is on this means that the PFL-signal is

displayed.

Volume control for the stereo effect-return

input.

Switch to listen to the effect-return signal.

Switch to listen to the master signal.

Volume control for the unbalanced stereo

Monitor output.

Volume control for the headphone output.

Stereo headphone output.

Fader which controls the output volume

of the master output (both

balanced and unbalanced).