Datex DTX-200 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Datex DTX-200. Datex DTX-200 15 páginas. Floppy drive disk emulator

User's Manual DTX-200

SING DRIVES CHAINS

A single DTX

The default floppy drive emulator configurations will be set as shown in the picture

below. You will be able to see this configuration or change it as you remove the protective

cover found on the upper part the emulator.

ST25

Ready

Pin34

WARNING:

Both disk change jumper cannot be set at the same time.

The emulator above is in the basic configuration when delivered by DATEX:

The « drive select » jumper is at address 1.

It is equipped with terminators.

If your machine just uses one DTX, this one must be in this configuration.

Nevertheless, if your controller uses more than one drives (drive chain), you have to

take some precautions.

_______________PARC D'ACTIVITES DE VILLEJUST - 9, place Marcel Rebuffat - 91971 COURTABOEUF CEDEX / FRANCE____________

S.A.S. au capital de 160. 000 € - R.C. EVRY B 331 142 018 - SIRET 331 142 018 00026 - APE 725Z- Int. VAT n° FR 81 331 142 018

Illustration 10: Drive select & terminators

DS2

DS1

Address 0

Address 1

Drive select 0

Drive select 1

Disk

Connector

Illustration 9: Jumper configurations

Edition: May 2013

ST17

Disk change

Pin 34

Address 0

Ready

Drive select 0

Pin34

ST15

Disk change

Pin 2

Website: www.datex-dsm.com