CooKing SVIF-CK3.0 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Cocinas CooKing SVIF-CK3.0. CooKing SVIF-CK3.0 13 páginas. Induction cooker
También para CooKing SVIF-CK3.0: Manual de instrucciones (18 páginas), Manual técnico (11 páginas), Manual técnico (10 páginas)
Imprimir páginaInstructions for use
S U R F A C E
P R I M E
1. Turning on: Make sure that the main switch, positioned in the bottom side of the unit, is set to "1". Press the on/
off button on the remote control to turn on the induction cooktop. The appliance will beep and the cooking zones
will appear on the remote control's LCD display. The cooktop will enter standby mode. To start cooking, choose one
of the three cooking zones by pressing the corresponding circle on the display. The pot or pan will automatically
start to heat up. If a pot or pan is not present in the chosen cooking zone, the message "E1" will flash on the LCD
display and the cooktop will automatically switch off after 60 seconds.
2. Timer mode: the "Timer" button can be used to maintain a power level for a specified period of time. The timer
can be set after selecting the cooking zone and power level. Press the + or - button on the Timer once and the LCD
display will show 0:00 and the time will flash. Press + or - to increase or reduce the time setting from 1 minute to 2
hours. After setting the timer, the LCD screen will display the remaining time and turn off the cooktop at the end of
the set period. If the time setting is 0, the timer function will turn off.
Note: hold down the + or - button for 3 seconds to increase or decrease the time from 10 minutes to 2 hours.
3. Lock/Unlock mode: the "Lock" button can be used to keep the "power level" and "timer" functions locked at set
levels. Press the "Lock" button to activate this function when the system is in operation. The LCD display will show
the lock symbol "L". In Lock mode, no buttons other than the On/Off button and the Lock button can be used. Hold
down the "Lock" button again for 3 seconds to cancel the lock function.
4. High temperature indication function: If the cooktop becomes excessively hot, the LCD display will read "H" (hot)
and behave as follows in the various modes:
a. During the cooking process: the LCD display will show "H" and blink continuously, without interrupting the ope-
ration of the system.
b. In standby mode: the LCD display will read "H" and blink continuously. It will disappear when the temperature
falls.
c. In OFF mode: the LCD display will read "H" without blinking. It will disappear when the temperature falls.
5. Turning off: press the "On / Off" button once to put the system in stand by; press the "On / Off" button twice to
permanently turn off the system.
NB: Remember that induction cooking is very efficient and quick. Heat is generated directly and rapidly in the bot-
tom of the pan. For this reason, never place an empty saucepan in the cooking zone. Place the oil or other cooking
ingredients in the pan before you begin cooking and select the heating level according to your requirements.
During cooking the pan must always remain in the centre of the cooking zone, otherwise the bottom of the pan
will heat unevenly and may result in burnt food and poor cooking quality. Check the pan constantly while the oil is
heating up to avoid overheating and the risk of burns.
The use of a silicone mat is mandatory when using non-COOKWARE pots and pans. Please note that the use of
adapter plates is strongly discouraged, especially if combined with the silicone mat.