Afag BF15 Traducción de las instrucciones de uso originales - Página 12

Navegue en línea o descargue pdf Traducción de las instrucciones de uso originales para Accionamientos de CC Afag BF15. Afag BF15 19 páginas. Bowl feeder

Imprimir página

Another possibility is to mount the device straight on to a base plate.

Suitable Afag standard parts are available for complete station assemblies using Afag

linear feeders.

4.3 Fixing the bowl

The bowl is secured to the mounting plate provided for it on the BF bowl feeder using a

central mounting screw. The mounting screw must be tightened using the torque speci-

fied in Table 2 in order to generate the required frictional locking.

There are adjusting holes on the mounting plate so that the bowl can be positioned pre-

cisely on the BF drive unit. This means that there is no need to repeat the alignment of

the interface on the bowl discharge when the bowl is changed or if a bowl that has been

removed for cleaning or repair is refitted.

Feeder bowls that are mounted differently (at the edges, for example) require special

adapter plates.

To ensure perfect operation of the equipment, do not exceed the maximum mass mo-

ment of inertia and feeder bowl weights. They are dependent on the design of the feeder

bowls.

Figure 5: Bowl mounting

Bowl

Central fixing

screw

Locating pin

Table 2: Tightening torques for the bowl mounting

Page 12

Model

Tightening torque [Nm]

2014-11-10

BF10

BF15

Release: 4.3