Austlift 141105 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Sistemas de elevación Austlift 141105. Austlift 141105 5 páginas. Ring panel lifter

DEMOULD THE RECESS FORMER

To demould the recess former, insert two rods into

the holes and levered out with a scissor action. This

procedure can avoid damage to the recess former.

Attempting to remove the recess former using the

tip of a carpenter's hammer will destroy it.

FITTING THE PANEL LIFTER

To transport the concrete panel, an appropriate ring

panel lifter should be inserted over the anchor head

which is in the concrete recess. The load ranges are

designed to mismatch-proof.

LOCKING THE PANEL LIFTER

The ring panel lifter is positively locked by a simple

hand-operated movement of the locking bolt

resulting in a safe connection of the ring panel lifter

to be able to move in any direction. The precast panel

can now be lifted out of the mould for transporting.

USING THE PANEL LIFTER

≥90°

The ring panel lifter is used for all load directions.

Maximum load of anchor and ring panel lifter must

be considered. Angle pull caused by spreaded chain

suspension is limited by a maximal 60°.

RELEASE THE PANEL LIFTER

The ring panel lifter can be released manually by pushing

back the locking bolt once the device is off-load.

Australian Lifting Centre