CookTek MagnaWave MC2500 Manual del usuario Instalación y funcionamiento - Página 9

Navegue en línea o descargue pdf Manual del usuario Instalación y funcionamiento para Placa de cocción CookTek MagnaWave MC2500. CookTek MagnaWave MC2500 11 páginas. Cooktek magnawave cooktops
También para CookTek MagnaWave MC2500: Manual del usuario (10 páginas), Manual de instalación y del usuario (10 páginas), Manual del usuario e instrucciones de instalación (6 páginas)

Imprimir página
Symptom
No Power
(No Lights or Fan Noise)
Pan Does Not Heat
Cooktop Suddenly
Stops Heating
Pan Does Not Get Hot
Enough Even Though
Power Levels Are Set
To Maximum-Induction Circuit Shared with Another
Efficient Pan In Use
Pan Cooks Unevenly,
Does Not maintain Heat Pan Bottom May Not Be Flat
Level, or Overheats

TROUBLESHOOTING GUIDE

Probable Cause
Unit Unplugged
No Power to Receptacle
No Power to Receptacle
No Power to Receptacle
No Power to Receptacle
Pan is Not Induction Efficient
Pan Diameter is less than 7 inches
Pan Not Centered Over
Cooktop Logo
Possible Power Brown Out
Circuit Shared with another
Electrical Device
Air Vents Blocked or Insufficient
Air Circulation
Safety Shut-Off Engaged
Extension Cord In Use
Electrical Device
Pan is Not Induction Efficient
Enough
Pan Not Centered Over
Cooktop Logo
Pan Diameter is Less Than 7 inches Use a larger Induction Efficient Pan
7
Possible Solution
Plug Unit into Appropriate Receptacle
Make Sure that Receptacle is Energized
Check Wall Switches
Check Circuit Breaker
Plug a different electronic device into the
receptacle to make sure that power is
present
Use Induction Efficient Pan
Use a larger Induction Efficient Pan
Center Pan
Assure proper voltage/power levels
Make sure that the Cooktop is not sharing
a circuit with other Electrical Devices.
Check air vents to make sure that they are
not blocked. Make sure that there is
sufficient air flow around the appliance
The Safety Shut-Off will engage if an empty
pan is left on the Cooktop surface while the
unit is working at full power. Make sure that
the Cooktop surface is clear. Wait 15-20
minutes for the unit to reset.
Do Not use extension cords. Extension
cords may affect the power levels
reaching the appliance
Make sure that the Cooktop is not sharing
a circuit with other Electrical Devices.
Use Induction Efficient Pan
Use Flatter Pan
Center Pan