Agri-Fab 45-02212 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Barredora de césped Agri-Fab 45-02212. Agri-Fab 45-02212 16 páginas. 38"
Imprimir páginaASSEMBLY OF HOPPER BAG
1. Turn the upper hopper tube so that the middle
brace holes face down as shown in figure 8. Slide
the tube through the two loops sewn to the top rear
seam inside the hopper bag.
IMPORTANT: The two holes in the middle of the
upper hopper tube must face down to allow assem-
bly of the support rods.
INNER BAG LOOPS
UPPER HOPPER TUBE
(brace holes on bottom)
FIGURE 8
2. Insert the two side hopper tubes through the
stitched flaps on each side of the hopper bag. See
figure 9.
3. Assemble the ends of the upper hopper tube onto
the ends of the side hopper tubes. Fasten together
using plastic plugs. See figure 9.
PLASTIC PLUG
FIGURE 9
SIDE HOPPER TUBE
4. Fit the ends of the (RH) and (LH) lower hopper
tubes together. Align the holes in the tubes and
insert a plastic plug. See figure 10.
LOWER
HOPPER
TUBE (RH)
FIGURE 10
5. Place the assembled lower hopper tubes into the
bottom of the hopper bag as. See figure 11.
6. Attach the ends of the lower hopper tubes to the
inside of the side hopper tubes using two 3/8" x 1/2"
clevis pins inserted from the inside, and two 3/32"
hair cotter pins. See figure 11.
LOWER HOPPER TUBE
FIGURE 11
7
PLASTIC PLUG
LOWER
HOPPER
TUBE (LH)
SIDE
HOPPER
TUBE
3/32" HAIR
COTTER PIN
3/8" x 1/2"
CLEVIS PIN
HOPPER BAG
BOTTOM