AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 Manual - Página 7

Navegue en línea o descargue pdf Manual para Accesorios para videojuegos AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2. AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 20 páginas. Kernel 8.2

Imprimir página
•
Do not leave any objects inside the machine! Risk of short circuits, electric shock or fire!
Do not push any objects through cabinet ventilation slots as they may touch dangerous voltage points.
•
Avoid spiling any liquid in or on the machine! Risk of electric shock or fire!
If liquids have been spilt on the machine, unplug the machine. Contact authorised service personnel for
a machine checkup.
1.2.2

Warning

WARNING
In the situations described below there may be a risk of injury or death.
•
Avoid damage to wires! Risk of short circuits or fire! Keep wires away from where people could
walk on them or stumble!
Avoid tension or compression on power cords and connectors.
•
Thermal hazard! Danger of burns!
Some components may reach high operating temperatures (e.g. TFT monitor).
•
Mechanical hazard! Danger of injury!
Some components inside the machine may have sharp edges. Improper operning and closing of the
machine may cause bruises.
1.2.3

Caution

CAUTION
In the situations described below there is a risk of damage to equipment.
•
Do not use organic solvents like thinners or abrasive materials to clean the device!
•
Provide adequate ventilation! Danger of overheating!
Openings on the top, on the sides and at the bottom of the cabinet are provided for ventilation. To
ensure proper operation and to prevent overheating, these openings should not be blocked or covered.
To allow hot air to escape make sure that there is a minimum space of 10 cm between the machine and
a wall or like structure.
•
Influence of magnetic fields on machines with a CRT monitor
Do not install machines with CRT monitors close to strong magnetic fields like loudspeakers or
fluorescent lamps. This equipment may affect the display of the image on the monitor. Additionally, this
may cause unusual noise.
•
LCD monitors may be damaged if they are not properly cleaned!
Use a soft cloth and a window cleaner to clean the surface of the monitor. Do not use solvents like ethyl
alcohol or thinners.
© 07 2008 AGI GmbH
L E G E N D A N D S A F E T Y P R E C A U T I O N S
45M626U1DE-02
S A F E T Y P R E C A U T I O N S
1
7