ADE WS 1501 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Termómetro ADE WS 1501. ADE WS 1501 8 páginas. Thermo-/hygrometer with mould alert

2. Now press the SET button once more and ALERT and

lower part of the display and the humidity indicator will blink. Now press the

button in order to set (in 5% intervals) the lower humidity threshold.

3. Press the SET button once more or wait approx. 10 seconds; the indicator

then returns to normal mode again.

4. In order to activate the humidity alarm, press the ON.OFF button once.

ALERT appears on the display

5. As soon as the humidity falls below or exceeds the values that you have set,

the

blink.

6. In order to stop the blinking of the symbol and alarm signal, press any button.

7. In order to switch off the humidity alarm, press the ON.OFF button once.

ALERT and

Remarks: The duration of the alarm is one minute.

Setting the mould alert

In order to activate the mould alert, press and hold the

the MOLD ALERT

upper part of the display and the humidity indicator blinks. Now press the

button in order to set the upper mould threshold with a value of 60%,

65%, 70%, or 75%.

Press and hold the

return to the normal display mode.

As soon as the humidity exceeds the set mould alert value, there is a risk of

mould formation. The symbols MOLD ALERT

the display and, simultaneously, the red LED alarm signal blinks (slowly –

every 5 seconds).

Press any button in order to stop the red LED alarm signal. The MOLD

ALERT

measured humidity falls back under the preset mould threshold value.

The factory preset value for the mould alert is 65%.

Selecting the temperature indicator (°C or °F)

In order to toggle between °C and °F units of temperature, press the °C/°F button.

symbol and, at the same time, the red LED alarm signal (quickly)

will no longer be displayed.

MOLD RISK symbols appear simultaneously in the

/°C/°F button or wait approx. 10 seconds in order to

MOLD RISK symbols remain visible on the display until the

MOLD RISK then appear on

will appear on the

/°C/°F button until