Bender DPM2x16FP Manual - Página 8

Navegue en línea o descargue pdf Manual para Monitor Bender DPM2x16FP. Bender DPM2x16FP 16 páginas. For use in electric vehicle (ev) charging stations, wall boxes and street light charging points

Imprimir página

Display module

The Display module can be connected to the charge controller, the main com-

ponent of a charging point, using a standard RJ45 cable. The second RJ45 ca-

ble interface socket is used to connect to the RFID module. The CC612 and the

RFID module can be connected using either RJ45 cable interface socket. The

RJ45 sockets are interchangeable.

The power supply is taken from the available RJ45. The voltage ranges corre-

spond to the bus system of the CC612. Software control of the Display module

is carried out via the CC612.

The maximum length of the RJ45 cable is 1 meter.

2.1 Dimensions for mounting

78.85 mm

73.90 mm

65.90 mm

11.90 mm

3.85 mm

82.50 mm

DPM2x16FP_D00296_01_M_XXEN/09.2017