BENDIX AR-2 ANTILOCK RELAY VALVE Manual - Página 11

Navegue en línea o descargue pdf Manual para Unidad de control BENDIX AR-2 ANTILOCK RELAY VALVE. BENDIX AR-2 ANTILOCK RELAY VALVE 12 páginas. Antilock relay valve

Imprimir página

5. Carefully insert the assembled valve (33) and seat (34)

into the proportioning piston (30), making certain that

the coils of the valve spring (32) rest on the four tabs of

the valve (33). While holding the seat (34) in place, install

the retaining ring (36) to secure it in the piston (30).

Make certain the retaining ring is fully seated in its

groove.

6. Install both the large and small diameter o-rings (31 &

29) on the proportioning piston (30).

7. Install both the large and small diameter o-rings (27 &

28) on the blend back piston (26), then insert the small

diameter of the proportioning piston (30) into the small

diameter end of the blend back piston (26).

8. Carefully insert the assembled proportioning and blend

back pistons (30 & 26) into the cover (4).

9. Install the spring cage (25) in the blend back piston (26)

so that it's flat side rests against the blend back piston.

10. Install the spring (24) in the cage (25) so that its coils

are within the I.D. of the cage.

11. Insert the service piston (23) in the cover (4) so that the

coils of the spring (24) are contained within the piston

and the six protruding posts of the piston are visible

after the piston is in the cover.

12. Install the o-ring (22) on the exhaust piston (21) then

install the exhaust piston (21) in the cover (4). Refer to

the figure and make certain that the exhaust piston (21)

is installed with its concave surface away from the

service piston (23).

14. While holding the exhaust piston (21) in the cover (4),

install the retaining ring (20), making certain it is fully

seated in its groove.

15. Install the exhaust diaphragm (39) using its screw (37)

and washer (38) to retain it. Torque the screw to 8-15

pound inches.

16. Install the valve retainer (15) on the inlet and exhaust

valve (16) so that the flange of the retainer (15)

surrounds the rubber portion of the valve. Install the

inlet and exhaust valve in the body (9).

17. Install the inlet and exhaust valve return spring (14) in

the body (9).

18. Install the large and small diameter o-rings (13 & 12) in

the cover (11), then install the exhaust cover in the body

(9) taking care not to damage the o-rings. Hold the

exhaust cover in place.

19. While depressing the exhaust cover (11), install the

retaining ring (10) in the body (9). Make certain the

retainer (10) is fully seated in its groove in the body.

20. If the AR-2

™

valve was equipped with a relay piston return

spring, install the spring in the body, large diameter first.

O-RING IDENTIFICATION CHART

O.D.

I.D.

KEY NO.

I.D.

.862"

1.424"

3.487"

3.234"

1.356"

1.112"

.737"

.412"

.739"

.489"

21. Using lubricant to hold them in place, install the large

diameter sealing ring (19) on the cover (4) and the

small diameter sealing ring (40) on the body (9).

22. Install the o-ring (18) on the relay piston (17), then install

the piston in the body (9).

23. After noting the relationship marks made prior to

disassembly, install the cover (4) on the body (9). Secure

the cover to the body using the two shortest cap screws

and lock washers (7). Make certain the sealing rings

(19 & 40) remain in place. Torque the cap screws to

120-150 pound inches.

24. Secure the mounting bracket (6) to the cover (4) using

the cap screws and lock washers (5), and torque the

cap screws to 180-220 pound inches. Then secure the

mounting bracket (6) to the body (9) and cover (4) using

the two longest cap screws and lock washers (7) and

nuts (8) and torque the cap screws to 120-150 pound

inches.

25. Install all air line fittings and plugs making certain thread

sealing material does not enter the valve.

26. Install the AR-2

™

valve on the vehicle and perform the

Operation and Leakage Tests before returning the vehicle

to service.

O.D.

1.068"

.103"

1.630"

.103"

3.693"

.103"

3.512"

.139"

1.496"

.070"

1.318"

.103"

.943"

.103"

.552"

.070"

.879"

.070"

.629"

.070"