aFe Power takeda 56-70005R Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para automóviles aFe Power takeda 56-70005R. aFe Power takeda 56-70005R 20 páginas.
Imprimir página
Figure D
Refer to Figure D for Steps 7-9
Step 7: Remove the two plastic rivets connecting the factory air inlet to the front of the car. Use a
flat-head screwdriver to press down on the center of the rivet to unlock, and then pull them out.
These plastic rivets will be replaced.
Step 8: With a 10mm socket, extension and ratchet, loosen the three bolts securing the factory
housing to the vehicle. These three bolts will be re-used during the installation of the Takeda
air intake system.
Step 9: Remove the bottom of the factory housing and air inlet as one piece out of the vehicle.
Page 7
REMOVAL
aFepower.com