BENDIX ULTIMATE TOW Manual de instrucciones de instalación y funcionamiento - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Controlador BENDIX ULTIMATE TOW. BENDIX ULTIMATE TOW 6 páginas.

Imprimir página
ALTERNATIVE WIRING DIAGRAM:
FOR CONNECTIONS IN VEHICLES WITH NO ASSISTED SAFETY SYSTEMS
When computerized systems prevent attaching the red wire to the brake switch directly. Please follow the appropriate wiring diagram
below for your situation.
7 Pin Trailer Socket
7 Pin Trailer Socket
12V Positive
12V Positive
Note: Not all wiring shown. Do not alter wires that are not shown. Wiring must be connected as per AS 4177.5-2004.
ALTERNATIVE WIRING DIAGRAM:
FOR CONNECTIONS TO VEHICLES WITH ASSISTED SAFETY SYSTEMS
Blocking Diode needs
Blocking Diode needs
to be fitted (supplied).
to be fitted (supplied).
7 Pin Trailer Socket
7 Pin Trailer Socket
Diode must be rated to at least 7A 12V
Diode must be rated to at least 7A 12V
12V Positive
12V Positive
Note: Not all wiring shown. Do not alter wires that are not shown. Wiring must be connected as per AS 4177.5-2004.
Wire Guide
White Wire
Blue Wire
Black Wire
Red Wire
Earth/Negative
Earth/Negative
To vehicle wiring
To vehicle wiring
Earth/Negative
Earth/Negative
Negative Battery
Brake
Positive Battery
Fuse : 12V 20A / 24V 15A
Brake Switch
Please note: an external fuse
must be fitted (not supplied).
The control unit is activated by a
positive feed brake switch only.
(Please check the polarity of your
vehicles brake switch before
connection)