dymax BlueWave MX-250 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial dymax BlueWave MX-250. dymax BlueWave MX-250 16 páginas. Led flood-curing emitter
Imprimir páginaUnpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage
immediately. Open each box and check for equipment damage. If parts are damaged,
notify the shipper and submit a claim for the damaged parts. Contact Dymax so that
new parts can be shipped to you immediately.
WARNING!
controller via the interconnect cable it is susceptible to ESD damage, handle
according to ESD standards using a ground strap and do not touch exposed
connector pins.
The parts below are included in every package/order. If parts are missing from your
order, contact your local Dymax representative or Dymax Customer Support to resolve
the problem.
Parts Included
•
BlueWave MX-250 LED Emitter Assembly
•
User Guide
Installation
The BlueWave MX-250 emitter is part of a MX-series curing system and requires
connection to a controller via an interconnect cable for proper operation.
Important Information
•
Do not connect any components while power is applied.
•
Mount the BlueWave MX-250 emitter to a rigid support, such as the emitter
stand PN 42390, prior to connecting the interconnect cable to prevent
handling damage.
•
Do not touch the emitter aperture glass. This can result in poor performance
and broken glass due to heating. Inspect before each use and clean with
isopropyl alcohol if contaminated.
6
Until the BlueWave MX-250 emitter is attached to a
U S E R G U I D E
|
B L U E W A V E M X - 2 5 0 E M I T T E R S