dymax T17241 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial dymax T17241. dymax T17241 20 páginas. Digital syringe dispenser

SD-100 Digital Syringe Dispenser User Guide

Front Control Panel

The front control panel of the SD-100 (Figure 2) includes:

Suck Back Control

■

not dispensing. This will help if material is leaking from the syringe.

Pressure Gauge

■

via the air cap, to dispense.

■

Air Pressure Regulator

dispense. In order to reach a desired pressure level, first pull the knob out to

unlock it so it will rotate. Turn the knob counter-clockwise to a point below the

desired pressure, and then turn the dial clockwise to reach the desired pressure.

■

Barrel/Valve Air Cap Outlet

up.

Digital Display

■

of the unit.

– Used as an up scroll key and to begin programming a mode.

■

▲/SET

– Used as a down scroll key and to save / recall a program.

▼/MEM

■

– Used as a left scroll key and to begin dispensing.

◄/SHOT

■

MODE/EXIT

■

functions. The SD-100 has the following operation modes:

MANUAL – In this mode the unit will dispense as long as the foot pedal or

SHOT button is pressed.

TIMER – The unit will dispense for a set amount of time regardless of how long

the foot pedal or shot button is pressed.

CYCLE – The unit will dispense and wait for a specified amount of time before

dispensing again. It will cycle continuously until the EXIT button is pressed.

— Keeps a steady pull of air pressure in the syringe when

— Shows the amount of pressure being applied to the syringe,

— Adjusts the amount of pressure being used to

— Air outlet where valve or barrel can be hooked

— Displays information pertaining to the programming and use

– Used to toggle between dispensing modes and to exit some