Dymo LabelManager 450D Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Dymo LabelManager 450D. Dymo LabelManager 450D 20 páginas. Dymo labelmanager user's guide
También para Dymo LabelManager 450D: Manual del usuario (19 páginas), Manual del usuario (20 páginas), Visión general (12 páginas), Inicio rápido (4 páginas)
Imprimir página
Storing Formats
In addition to label text, you can store up to ten specific
label formats you use frequently. This feature stores only the
formatting information not the label text.
Ten fields, which represent memory locations, are displayed.
You can store new formats in any of the fields, however, if you
select a location that is filled, the previous label format will be
overwritten.
To store the current format
1.
Press
.
Memory
H
Save and press
2.
Select
3.
Select
Format and press
4.
Select a field and press
the field.
5.
Enter a name for the format and press
format is saved and you are returned to the label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in memory to
use at a later time.
To recall labels or formats
1.
Press
.
Memory
2.
Select
Recall and then Label, Format, or Last Printed.
A list of memory locations is displayed similar to storing a
label or format.
3.
Select a label or format to recall and press
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance.
Clean your label maker from time to time to keep it working
properly. Clean the cutter blade each time you replace the tape
cassette.
.
H
.
H
. The word Name? appears in
H
. Your label
H
.
To clean the cutter blade
1.
Press
A to turn off the power.
2.
Open tape cassette compartment and remove cassette.
3.
Press
and A together. The message, Cut Test,
appears on the display.
4.
Press the
+
keys together, then press the
Shift
repeatedly, while holding the
will move into view in small steps.
5.
When you are able to access both sides of the blade, release
the keys.
6.
Use a cotton ball and alcohol to clean both sides of the
cutter blade.
è
The cutter blade is extremely sharp. Use caution when
cleaning.
7.
After cleaning the blade, press
home position.
You can also follow this procedure if the cutter blade becomes
lodged in the forward position and will not move.
To clean the print head
1.
Remove the tape cassette.
2.
Remove the cleaning tool from inside the label
compartment cover.
3.
Gently wipe the padded side of the tool across the print
head. See Figure 11.
Figure 11
down. The cutter blade
Shift
to return the blade to its
15