GABOR UPM-360 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Accesorios para proyectores GABOR UPM-360. GABOR UPM-360 12 páginas. Universal projector mount
Imprimir páginaProjector Placement
Before installing the Gabor UPM-360, you will need to determine the projector's
placement and identify surrounding ceiling or wall supports for attachment.
1. Measure the width at the top of your projector's screen, and locate the center.
Make a mark above the center point.
2. Find your projector's throw distance (check your projector's manual). Use the
throw distance measurement, and form a straight line from the mark you
made in step 1. This will determine the placement of your projector.
3. To locate the mounting plate's placement, add the throw distance to the
distance between the projector's lens and the projector mount's center when
attached to the projector. You can easily determine this by placing the
projector mount onto the housing of the projector.
Plate Installation
The mounting plate needs to be secured to a concrete or wood studded
ceiling or wall.
Optional: If you're running cables, such as audio, video, or low-voltage power
cables, through the rotating column's cable access, you'll need to drill an
extra hole in the wood or concrete support structure to fit the cables and
connect them to the projector.
Column
Distance to flush column
Screen
Throw distance
center point
5