Dymo RhinoPRO 5000 Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Dymo RhinoPRO 5000. Dymo RhinoPRO 5000 13 páginas. User guide
También para Dymo RhinoPRO 5000: Referencia rápida (2 páginas), Manual del usuario (14 páginas), Especificaciones técnicas (2 páginas)
Imprimir página
Printing Fixed Length Labels
Normally, the length of the label is determined by
the length of the text entered. However, you may
wish to make a label for a specific purpose that is a
fixed length regardless of the length of the text.
You can specify a fixed length for a label in 0.250"
(6 mm) increments between 0.500" (20 mm) and
40.000" (999.9 mm). The preset fixed length is 1.5"
(25 mm). Any change you make to the fixed length
setting remains in effect until you change it.
The amount of text that will print on the label
determines the minimum length of a label,
regardless of the fixed length you set manually. For
example, setting a fixed length of 0.50" for a label
with 20 characters would have no effect on the
label length.
To set the label length
1. Press
.
FIXED
2. Press
to increase the length.
3. Press
to decrease the length.
4. Press
.
Printing Patch Panel Labels
Patch panel mode allows you to label a row of ports
on a patch panel. You select the distance between
ports, enter the desired text, serialize, and print.
The result is a long label with multiple, evenly
spaced text for each port. See Figure 14.
01 02 03 04 05 06
Figure 14
To print a patch panel label
1. Enter the text for the first position on the label.
2. Press
.
PPANEL
8
3. Enter the distance between each label and
FIXED
press
value can be set in increments of 0.5" (12 mm)
up to 20" (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the text that will print on
the label.
Printing Terminal Block Labels
Terminal block labels are very similar to patch
panel labels; however, the text is printed vertically.
See Figure 15.
To print a terminal block label
1. Enter the text for the first position on the label.
2. Press
3. Enter the distance between each label and
press
PPANEL
value can be set in increments of 0.05" (1 mm)
up to 20" (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the desired number or
letter that will print on the label.
Printing Vertical Labels
Single-line labels can be printed with the text
running vertically.
To print vertically
1. Enter the text for your label.
2. Press
. The default is 0.5" (12 mm) and the
Figure 15
.
TBLOCK
. The default is 0.5" (12 mm) and the
and then
.
VERT
Print
TBLOCK
VERT