Dymo LabelWriter 450 Duo Label Printer Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Dymo LabelWriter 450 Duo Label Printer. Dymo LabelWriter 450 Duo Label Printer 16 páginas. Labelwriter series label printers
También para Dymo LabelWriter 450 Duo Label Printer: Manual de inicio rápido (20 páginas), Manual de inicio rápido (20 páginas), Visión general (2 páginas), Manual del usuario (19 páginas), Manual de inicio rápido (8 páginas), Manual de hardware (2 páginas)

4. Loading Labels

The LabelWriter Duo printer prints two types of labels: die-cut paper labels (such as Address or

Shipping labels) and D1 label cassettes.

Important!

In order for the labels to feed properly during printing, pay attention to the following when loading

labels on the spool and into the printer:

• The label spool guide must be pushed flush against the label roll, with no gap. See

Figure 6.

• The labels must be loaded with the left edge of the label inserted against the left edge of the

label feed slot. See Figure 8.

To load a label roll

Press the form-feed button to eject the labels that protected the

printer during shipment.

Open the top cover and remove any packing material inside the

label compartment.

Remove the label spool from inside the top cover and pull the spool

guide from the spindle.

Hold the spool spindle in your left hand and place the label roll on the

spindle so that the labels feed from underneath and the left edge of the label roll is firmly

against the side of the spool. See Figure 5.

Spool

spindle

guide

Figure 5