Dymo LabelWriter 450 Turbo Manual práctico - Página 2

Navegue en línea o descargue pdf Manual práctico para Impresora Dymo LabelWriter 450 Turbo. Dymo LabelWriter 450 Turbo 3 páginas. How to order and insert a roll of labels in the dymo labelwriter
También para Dymo LabelWriter 450 Turbo: Manual de inicio rápido (20 páginas), Manual de inicio rápido (14 páginas), Visión general (2 páginas), Manual de instalación (11 páginas), Manual de inicio rápido (10 páginas), Manual del usuario (19 páginas), Manual de instalación (4 páginas)

4. Insert the label spool into the slot in the printer cover with the labels extending from underneath

the roll. See Figure 7 below.

5. Align the left edge of the label with the left edge of the label feed slot and insert the label into the

slot. See Figure 8 below.

a. The printer should automatically feed the label, stopping at the beginning of the first

label.

b. If the printer does not feed the labels, make sure the first label is fully inserted and then

press the form-feed button.

c. If the first label on the roll is not a full label, press the form-feed button to eject the partial

label.

6. Slide the label guide to the left until the label guide aligns with the right edge of the label.

a. Make sure that the label guide does not pinch the label.

7. Open the symplr® program. Slide the symplr® plastic test badge through the badge reader

and print a test badge to confirm the new roll works. If the badge prints you were

successful.

8. Carefully lower the top cover.

symplr®

Have Questions? Need Help?