Gacell CT-1000 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Cargador de batería Gacell CT-1000. Gacell CT-1000 9 páginas.

7) Follow these steps when using 12V accessory plug (CT-1000 does not

have this accessory): keep the vehicle hood open. Connect the end of

the 12V accessory plug to the charger; insert the 12V accessory plug into

the vehicle's 12V outlet. If the vehicle's ignition key has to be on in

order for the 12V outlet to supply / receive power, turn the key, without

starting the engine.

8) A marine (boat) battery must be removed and charged on shore. To

charge it on board requires equipment specially designed for marine

use.

CHARGING MODES

CT-1000 has two modes: 12V and 6V. Do not operate the charger until

you confirm the appropriate charge mode for your battery.

Mode

12V

NOTICE: Make sure your battery to be charged / maintained is in good

condition. The CT-750 cannot be used to recover severely discharged

batteries or dead batteries.

How to deal with the batteries which are deeply discharged, but in good

condition?

1. Make sure the battery is in good condition (not dead) and was deeply

discharged only. You can use the battery analyzer to get the result if you

have.

2. Jumpstart your vehicle or use a battery charger with recovery function

to activate the battery until the battery voltage increases to normal

condition. For 12V batteries, the normal voltage is above 8 volt at least;

for 6V batteries, the normal voltage is above 4 volt at least.

3. Use the CT-1000 Charger / Maintainer do the rest charging and

maintaining work.

Explanation

Charging and Maintaining 12V

WET/GEL/MF/EFB/AGM batteries (Blue

Charging and Maintaining 6V

WET/GEL/MF/EFB/AGM batteries (Green

LED)